Andesi - forum

#### httpd.conf -- Apache HTTP server configuration file
##
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /etc/apache/srm.conf and then /etc/apache/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerType is either inetd, or standalone.  Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept, unless they are specified
# with an absolute path.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot /etc/apache
#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
LockFile /var/lock/apache.lock
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/apache.pid
#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this.  But if yours does (you'll know because
# this file will be  created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/apache.scoreboard
#
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order.  The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity.  The commented-out values
# below are the built-in defaults.  You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig /etc/apache/srm.conf
#AccessConfig /etc/apache/access.conf
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
#
# Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 10
#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 5
#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150
#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
#       request per connection. For example, if a child process handles
#       an initial request and 10 subsequent "keptalive" requests, it
#       would only count as 1 request towards this limit.
#
MaxRequestsPerChild 100
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80
#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your apache
# binary.
#
# Please keep this LoadModule: line here, it is needed for installation.
Include /etc/apache/modules.conf
#
# ExtendedStatus: controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
<IfModule mod_status.c>
  ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#
#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need apache to be run as root initially.
#
Port 80
#
# If you wish apache to run as a different user or group, you must run
# apacheas root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run apache as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group nobody on these systems!
#
User www-data
Group www-data
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin webmaster@localhost
#
# ServerName: allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
ServerName localhost
#
#ServerName new.host.name
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot /var/www
#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
    Options SymLinksIfOwnerMatch
    AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory /var/www/>
#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options Indexes Includes FollowSymLinks MultiViews
#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
    AllowOverride None
#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>
#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
    UserDir public_html
#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
    <Directory /home/*/public_html>
        AllowOverride FileInfo AuthConfig Limit
        Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
        <Limit GET POST OPTIONS PROPFIND>
            Order allow,deny
            Allow from all
        </Limit>
        <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
            Order deny,allow
            Deny from all
        </Limit>
    </Directory>
</IfModule>
#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
    DirectoryIndex index.html index.htm index.shtml index.cgi index.php
</IfModule>
#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>
#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
#
# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName Off
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile /usr/share/file/magic.mime
</IfModule>
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# Note that Log files are now rotated by logrotate, not by apache itself.
# This means that apache no longer attempts to magically determine
# where your log files are kept; you have to fill out stanzas in
# /etc/logrotate.d/apache yourself.
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache/error.log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" \"%{forensic-id}n\" %T %v" full
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" \"%{forensic-id}n\" %P %T" debug
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" \"%{forensic-id}n\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{forensic-id}n\"" forensic
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog /var/log/apache/access.log common
#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/apache/referer.log referer
#CustomLog /var/log/apache/agent.log agent
#
# If you prefer a single logfile with access, agent, referer and forensic
# information (Combined Logfile Format) you can use the following directive.
#
CustomLog /var/log/apache/access.log combined
<IfModule mod_log_forensic.c>
 ForensicLog /var/log/apache/forensic.log
</IfModule>
#
# Debugging information. With apache 1.3.31 two new debugging modules have been
# introduced to facilitate this task: mod_backtrace and mod_whatkilledus.
# They must NOT be used in production environment if not for debugging!
# You must know what you are doing before enabling the modules and
# uncommenting the following lines.
#
<IfModule mod_backtrace.c>
 EnableExceptionHook On
 #
 # Backtrace logs are written to error.log but optionally they can be
 # redirected to a different file.
 #
 # BacktraceLog /var/log/apache/backtrace.log
 #
</IfModule>
<IfModule mod_whatkilledus.c>
 EnableExceptionHook On
 #
 # Whatkilledus logs are written to error.log but optionally they can be
 # redirected to a different file.
 #
 # WhatKilledUsLog /var/log/apache/whatkilledus.log
 #
</IfModule>
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On
#
# This directive controls whether Server response header field which is
# sent back to clients includes a description of the generic OS-type of
# the server as well as information about compiled-in modules.
# Set to one of: Prod[uctOnly] | Min[imal] | OS | Full
# If the directive is not specified the default is set to Full.
#
#ServerTokens Full
#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/"..
#
<IfModule mod_alias.c>
    Alias /icons/ /usr/share/apache/icons/
    <Directory /usr/share/apache/icons>
         Options Indexes MultiViews
         AllowOverride None
         Order allow,deny
         Allow from all
    </Directory>
    Alias /images/ /usr/share/images/
    <Directory /usr/share/images>
         Options MultiViews
         AllowOverride None
         Order allow,deny
         Allow from all
    </Directory>
</IfModule>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
<IfModule mod_alias.c>
    ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
#
# "/usr/lib/cgi-bin" could be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
    <Directory /usr/lib/cgi-bin/>
        AllowOverride None
        Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
        Order allow,deny
        Allow from all
    </Directory>
</IfModule>
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#
#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>
    #
    # FancyIndexing: whether you want fancy directory indexing or standard
    #
    IndexOptions FancyIndexing NameWidth=*
    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/deb.gif .deb
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    #
    # DefaultIcon: which icon to show for files which do not have an icon
    # explicitly set.
  #
    DefaultIcon /icons/unknown.gif
    #
    # AddDescription: allows you to place a short description after a file in
    # server-generated indexes.  These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    #
    # ReadmeName: the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName: the name of a file which should be prepended to
    # directory indexes.
    #
    # The module recognize only 2 kind of mime-types, text/html and
    # text/*, but the only method it has to identify them is via
    # the filename extension. The default is to include and display
    # html files.
    #
    ReadmeName README.html
    HeaderName HEADER.html
    # Otherwise you can comment the 2 lines above and uncomment
    # the 2 below in order to display plain text files.
    #
    # ReadmeName README.txt
    # HeaderName HEADER.txt
    #
    # IndexIgnore: a set of filenames which directory indexing should ignore
    # and not include in the listing.  Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# HEADER.html HEADER.txt RCS CVS *,v *,t
    # Uncomment the following IndexIgnore line to add README.* to the file
   # list that will not be displayed by mod_autoindex.
    # It is not enabled by default on Debian system to permit users to properly
    # browse Debian documentation (/doc/)
    #
    #IndexIgnore README.*
</IfModule>
#
# Document types.
#
<IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
    # uncompress information on the fly. Note: Not all browsers support
    # this.  Despite the name similarity, the following Add* directives
    # have nothing to do with the FancyIndexing customization
    # directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    #
    # AddLanguage: allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    #
    # Note 3: There is 'work in progress' to fix this and get
    # the reference data for rfc3066 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
  # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Portugese (pt) - Luxembourgeois (lb)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddCharset ISO-8859-1 .latin1
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage lb .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .se
    AddLanguage cs .cz
    # LanguagePriority: allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change
    # this.
    #
    <IfModule mod_negotiation.c>
        LanguagePriority en da nl et fr de el it ja pl pt pt-br lb ca es sv
    </IfModule>
    #
    # AddType allows you to tweak mime.types without actually editing
    # it, or to make certain files to be certain types.
    #
 #
    # For example, the PHP 3.x module (not part of the Apache
    # distribution - see http://www.php.net) will typically use:
    #
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    #
    # And for PHP 4.x, use:
    #
    AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    AddType image/bmp .bmp
    # hdml
    AddType text/x-hdml .hdml
    #
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into
    # the server or added with the Action command (see below).
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    #AddHandler cgi-script .cgi .sh .pl
    #
    # To use server-parsed HTML files mod_include has to be enabled.
    #
    <IfModule mod_include.c>
     AddType text/html .shtml
     AddHandler server-parsed .shtml
    </IfModule>
    #
    # Uncomment the following line to enable Apache's send-asis HTTP
    # file feature.
    #
  #AddHandler send-as-is asis
    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map
    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var
</IfModule>
# End of document types.
#Default charset to iso-8859-1 (http://www.apache.org/info/css-security/).
AddDefaultCharset iso-8859-1
#
# Action: lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web
#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta
#
#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the (") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.
<IfModule mod_setenvif.c>
    #
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    #
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    #
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# If the perl module is installed, this will be enabled.
<IfModule mod_perl.c>
  <IfModule mod_alias.c>
   Alias /perl/ /var/www/perl/
  </IfModule>
  <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    Options +ExecCGI
  </Location>
</IfModule>
#
# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/apache/passwd.
# You must unremark these two lines at the top of this file as well:
#LoadModule put_module          modules/mod_put.so
#AddModule mod_put.c
#
#<IfModule mod_alias.c>
# Alias /upload /tmp
#</IfModule>
#<Location /upload>
#    EnablePut On
#    AuthType Basic
#    AuthName Temporary
#    AuthUserFile /etc/apache/passwd
#    EnableDelete Off
#    umask 007
#    <Limit PUT>
#       require valid-user
#    </Limit>
#</Location>
#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>
#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>
# Allow access to local system documentation from localhost.
# (Debian Policy assumes /usr/share/doc is "/doc/", at least from the localhost.)
<IfModule mod_alias.c>
 Alias /doc/ /usr/share/doc/
</IfModule>
<Location /doc>
  order deny,allow
  deny from all
  allow from 127.0.0.0/255.0.0.0
  Options Indexes FollowSymLinks MultiViews
</Location>
#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org.  Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
<IfModule mod_proxy.c>
    #
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #
    #ProxyRequests On
    #<Directory proxy:*>
    #    Order deny,allow
    #    Deny from all
    #    Allow from .your_domain.com
    #</Directory>
    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #
    #ProxyVia On
    #
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    #
    #CacheRoot "/var/cache/apache"
    #CacheSize 5
    #CacheGcInterval 4
    #CacheMaxExpire 24
    #CacheLastModifiedFactor 0.1
    #CacheDefaultExpire 1
    #NoCache a_domain.com another_domain.edu joes.garage_sale.com
</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
#<VirtualHost ip.address.of.host.some_domain.com>
#    ServerAdmin [email protected]_domain.com
#    DocumentRoot /www/docs/host.some_domain.com
#    ServerName host.some_domain.com
#    ErrorLog logs/host.some_domain.com-error.log
#    CustomLog logs/host.some_domain.com-access.log common
#</VirtualHost>
#<VirtualHost _default_:*>
#</VirtualHost>
# Automatically added by the post-installation script
# as part of the transition to a config directory layout
# similar to apache2, and that will help users to migrate
# from apache to apache2 or revert back easily
Include /etc/apache/conf.d

<IfModule mod_php5.c>
  AddType application/x-httpd-php .php .phtml .php3
  AddType application/x-httpd-php-source .phps
</IfModule>

root@parfeu02:/# netstat -taupe |grep LISTEN
tcp        0      0 localhost:2208          *:*                     LISTEN     root       5731       2268/hp                 iod
tcp        0      0 *:35010                 *:*                     LISTEN     oracle     63873      7437/xe                 _d000_XE
tcp        0      0 localhost:mysql         *:*                     LISTEN     mysql      5855       2364/my                 sqld
tcp        0      0 *:sunrpc                *:*                     LISTEN     root       5152       1955/po                 rtmap
tcp        0      0 localhost:webcache      *:*                     LISTEN     oracle     67724      12023/t                 nslsnr
tcp        0      0 *:1521                  *:*                     LISTEN     oracle     67654      12023/t                 nslsnr
tcp        0      0 *:auth                  *:*                     LISTEN     root       7310       2649/in                 etd
tcp        0      0 localhost:ipp           *:*                     LISTEN     root       6136       2499/cu                 psd
tcp        0      0 localhost:smtp          *:*                     LISTEN     root       7277       2623/ex                 im4
tcp        0      0 localhost:47998         *:*                     LISTEN     hplip      5742       2271/py                 thon
tcp        0      0 *:57279                 *:*                     LISTEN     statd      7470       2704/rp                 c.statd
tcp6       0      0 *:ssh                   *:*                     LISTEN     root       7328       2659/ss                 hd
root@parfeu02:/#

source /etc/oracle/
#!/bin/bash
#
# apache        Start the apache HTTP server.
#
# The variables below are NOT to be changed.  They are there to make the
# script more readable.
set -e
. /lib/lsb/init-functions
NAME=apache
DAEMON=/usr/sbin/$NAME
PIDFILE=/var/run/$NAME.pid
CONF=/etc/$NAME/httpd.conf
APACHECTL=/usr/sbin/${NAME}ctl
# note: SSD is required only at startup of the daemon.
SSD=`which start-stop-daemon`
ENV="env -i LANG=C PATH=/bin:/usr/bin:/usr/local/bin"
# Check that we're not being started by inetd
if egrep -q -i "^[[:space:]]*ServerType[[:space:]]+inet" $CONF
then
    exit 0
fi
test_config() {
    if [ ! -x $APACHECTL ]; then
        log_begin_msg "$APACHECTL is not executable, exiting..."
        log_end_msg 1
    fi
    # ensure we don't leak environment vars into apachectl
    APACHECTL="$ENV $APACHECTL"
    if ! $APACHECTL configtest 2> /dev/null
    then
        log_begin_msg "Configuration syntax error detected, not starting/reloading..."
        [ "$VERBOSE" != "no" ] && echo "" && $APACHECTL configtest || true
        log_end_msg 1
    fi
}
should_start() {
    if [ ! -x $DAEMON ]; then
        log_begin_msg "$DAEMON is not executable, not starting/reloading..."
        log_end_msg 1
    fi
}
case "$1" in
  start)
    should_start
    test_config
    log_begin_msg "Starting $NAME 1.3 web server..."
    if $ENV $SSD --start --pidfile $PIDFILE --exec $DAEMON --oknodo > /dev/null; then
      log_end_msg 0
    else
      log_end_msg 1
    fi
    ;;
  stop)
    log_begin_msg "Stopping $NAME 1.3 web server..."
    if $ENV $SSD --stop --pidfile $PIDFILE --oknodo; then
      rm -rf /var/lib/apache/mod-bandwidth/link/*
      log_end_msg 0
    else
      rm -rf /var/lib/apache/mod-bandwidth/link/*
      log_end_msg 1
    fi
    ;;
  reload | force-reload)
    test_config
    log_begin_msg "Reloading $NAME 1.3 configuration..."
    if $ENV $SSD --stop --pidfile $PIDFILE --signal USR1 --oknodo > /dev/null; then
      log_end_msg 0
    else
      log_end_msg 1
    fi
    ;;
reload-modules)
    should_start
    test_config
    log_begin_msg "Reloading $NAME 1.3 modules..."
    if start-stop-daemon --stop --pidfile $PIDFILE --oknodo --retry 30; then
      if $ENV $SSD --start --pidfile $PIDFILE --exec $DAEMON > /dev/null; then
        log_end_msg 0
      else
        log_end_msg 1
      fi
    else
      log_end_msg 1
    fi
    ;;
  restart)
    test_config
    log_begin_msg "Restarting $NAME 1.3 web server..."
    if ! start-stop-daemon -q --stop --pidfile $PIDFILE --signal HUP; then
      if $ENV $SSD --start --pidfile $PIDFILE --exec $DAEMON --oknodo > /dev/null; then
        log_end_msg 0
      else
        log_end_msg 1
      fi
    else
      log_end_msg 0
    fi
    ;;
  *)
    echo "Usage: /etc/init.d/$NAME {start|stop|reload|reload-modules|force-reload|restart}"
    exit 1
    ;;
esac

PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/pdo_oci.so' - /usr/lib/php5/20060613+lfs/pdo_oci.so: cannot open shared object file: No such file or directory in Unknown on line 0
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
/usr/sbin/apache: symbol lookup error: /usr/lib/php5/20060613+lfs/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce
~
~

~EÉt^X~CÄ^\¸^A^@^@^@[^_]Ã~CÄ^\1À[^_]Ã~P~EÀtä~Mz^PÇEì^@^@^@^@ÇEð^@^@^@^@~Mt&^@~M¼'^@^@^@^@~KEè~Kuð~KP^H^AÖ~K^F~I^D$èÿ×ÿÿ~KVD~I^W~KMè~KQ^H~KMð~KT^Q^\~IGô~IWø~ID$^D~KUè~KB^H~K^D^A~I^D$èÂ×ÿÿÇGü^B^@^@^@~IGð~CÇ^XÿEì~KM^H~CEðP~KEì9A^Xw~_ébÿÿÿ~Mv^@~M¼'^@^@^@^@U~Iå~Cì(~I}ü~K}^H~I]ô~Iuøè>Ûÿÿ~AÃe"^@^@~Kw^P~KF$~EÀt`~I^D$è^U×ÿÿ~CøetL~EÀtH~Cød~P~Mt&^@^O~D~J^@^@^@¸~T^A^@^@~ID$^L~M~CPíÿÿ~ID$^H~I|$^D~KG0~I^D$èlØÿÿ1À~M¶^@^@^@^@~K]ô~Kuø~K}ü~Iì]Ã~Mv^@¸^A^@^@^@ëé~KF^D~EÀtB~I^D$è^NØÿÿ~EÀ~IF^Lt^U~KF^D~I^D$èÌÕÿÿ~IF^P¸^A^@^@^@ë¾~K^F~K^@~I^D$è^VÖÿÿ~EÀu^R~M´&^@^@^@^@~M¼'^@^@^@^@1Àë~\¸¢^A^@^@~ID$^Lémÿÿÿ~M´&^@^@^@^@~M¼'^@^@^@^@U~IåWVS~Cì<~KE^HèTÚÿÿ~AÃ{!^@^@~K@^P~IEÌ~K^P~IUÐ~KP$~EÒ^O~D~U^@^@^@~K@,~I^T$~ID$^Dè(Õÿÿ~DÀt0¸b^@^@^@~ID$^L~M~CPíÿÿ~ID$^H~Ku^H~It$^D~KF0~I^D$è^?×ÿÿ1À~CÄ<[^_]Ã~P~KUÌ~KB$~I^D$è^VÔÿÿ~EÀ^O~E^]^A^@^@~KuÌ~K~^D~Eÿ^O~D>^A^@^@~KMÌ~KA$~I^D$èRØÿÿ~IÑ~IÂ!È@^O~Dê^@^@^@~Ku^H¸^A^@^@^@~IV@~CÄ<[^_]Ã~KUÌ~KB^D~EÀt^R~I^D$è`Öÿÿ~KMÌÇA^D^@^@^@^@~Ku^H~KFP~ID$^H~KFL~ID$^D~KUÐ~K^B~I^D$è8Õÿÿ~EÀ^O~E}^@^@^@~KMÐ~K^A~I^D$ècÖÿÿ~IÑ~IÂ!È@u~U~KuÐöF^D^B^O~E^F^B^@^@~K^F~I^D$è3Óÿÿ~KUÌ~IB^D~KEÌ~K@^D~EÀ^O~D^U^D^@^@~KM^HöA^T^AÇA@^@^@^@^@uD~KuÌ~KF^D~I^D$èñÓÿÿ~KU^H~IB^X~KF^D~I^D$èÐÓÿÿ~IF^H¸^A^@^@^@éæþÿÿ¸Ö^@^@^@~ID$^L~M~CPíÿÿ~ID$^Hé½þÿÿ¸^A^@^@^@éÄþÿÿ¸g^@^@^@~ID$^L~M~CPíÿÿ~ID$^H~KM^H~IL$^D~KA0~I^D$è^\Öÿÿ~CÄ<1À[^_]Ã~KF$~I^D$è^G×ÿÿ~EÀ~IÂ~IF^D^O~Dªþÿÿ~KEÐÇEØ^@^@^@^@ö@^D^Bt^L^O¶F

root@parfeu02:/# netstat -taupe
Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale          Adresse distante        Etat        Utilisatr  Inode      PID/Program name  
tcp        0      0 localhost:2208          *:*                     LISTEN     root       5731       2268/hpiod         
tcp        0      0 *:35010                 *:*                     LISTEN     oracle     63873      7437/xe_d000_XE    
tcp        0      0 localhost:mysql         *:*                     LISTEN     mysql      5855       2364/mysqld        
tcp        0      0 *:sunrpc                *:*                     LISTEN     root       5152       1955/portmap       
tcp        0      0 localhost:webcache      *:*                     LISTEN     oracle     67724      12023/tnslsnr      
tcp        0      0 *:1521                  *:*                     LISTEN     oracle     67654      12023/tnslsnr      
tcp        0      0 *:auth                  *:*                     LISTEN     root       7310       2649/inetd         
tcp        0      0 localhost:ipp           *:*                     LISTEN     root       6136       2499/cupsd         
tcp        0      0 localhost:smtp          *:*                     LISTEN     root       7277       2623/exim4         
tcp        0      0 localhost:47998         *:*                     LISTEN     hplip      5742       2271/python        
tcp        0      0 *:57279                 *:*                     LISTEN     statd      7470       2704/rpc.statd     
tcp        0      0 parfeu02:1521           parfeu02:41454          ESTABLISHEDoracle     67723      12023/tnslsnr      
tcp        0      0 parfeu02:41454          parfeu02:1521           ESTABLISHEDoracle     67722      7415/xe_pmon_XE    
tcp6       0      0 *:www                   *:*                     LISTEN     root       78872      14669/apache2      
tcp6       0      0 *:ssh                   *:*                     LISTEN     root       7328       2659/sshd          
tcp6       0      0 parfeu02:ssh            ::ffff:192.168.110:1179 ESTABLISHEDroot       68264      12290/1            
tcp6       0      0 parfeu02:ssh            ::ffff:192.168.:skkserv ESTABLISHEDroot       68244      12288/0            
udp        0      0 *:32769                 *:*                                avahi      7194       2568/avahi-daemon: 
udp        0      0 *:32770                 *:*                                statd      7461       2704/rpc.statd     
udp        0      0 localhost:32791         *:*                                oracle     63770      7415/xe_pmon_XE    
udp        0      0 localhost:32792         *:*                                oracle     63870      7437/xe_d000_XE    
udp        0      0 localhost:32793         *:*                                oracle     63883      7439/xe_s000_XE    
udp        0      0 localhost:32794         *:*                                oracle     63893      7441/xe_s001_XE    
udp        0      0 localhost:32795         *:*                                oracle     63903      7443/xe_s002_XE    
udp        0      0 localhost:32796         *:*                                oracle     63912      7445/xe_s003_XE    
udp        0      0 *:mdns                  *:*                                avahi      7193       2568/avahi-daemon: 
udp        0      0 *:sunrpc                *:*                                root       5149       1955/portmap       
udp        0      0 *:ipp                   *:*                                root       6139       2499/cupsd         
udp        0      0 *:760                   *:*                                root       7449       2704/rpc.statd     
root@parfeu02:/#

root@parfeu02:/# dpkg -l | grep apache
ii  apache                            1.3.34-4.1                      versatile, high-performance HTTP server
ii  apache-common                     1.3.34-4.1                      support files for all Apache webservers
ii  apache2-doc                       2.2.3-4                         documentation for apache2
ii  apache2-mpm-prefork               2.2.3-4                         Traditional model for Apache HTTPD 2.1
ii  apache2-utils                     2.2.3-4                         utility programs for webservers
ii  apache2.2-common                  2.2.3-4                         Next generation, scalable, extendable web se
ii  libapache-mod-php5                5.2.0-8+etch7                   server-side, HTML-embedded scripting languag
rc  libapache2-mod-php4               4.4.4-8+etch4                   server-side, HTML-embedded scripting languag
ii  libapache2-mod-php5               5.2.0-8+etch7                   server-side, HTML-embedded scripting languag
root@parfeu02:/#