Andesi - forum

Forum francophone pour Debian

Vous n'êtes pas identifié(e).

#1 26/10/2004 11:33:02

ptitlouis
Moderator
Lieu : Levallois-Perret
Inscription : 21/04/2003
Messages : 3 653

SCSI mort ou pas ?

Bonjour,

C'est la mauvaise section, mais y a pas mieux pour mon problème donc, voila. J'ai une carte SCSI avec un graveur et un lecteur dessus, depuis quelques temps, ca merde (quand j'en sais rien), je récupère le message suivant qui vient gonfler mes logs :

Oct 26 11:28:26 localhost kernel: (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
Oct 26 11:28:47 localhost kernel: (scsi0:A:1:0): Unexpected busfree while idle
Oct 26 11:28:47 localhost kernel: SEQADDR == 0x166
Oct 26 11:28:52 localhost kernel: (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15


Mais de temps en temps, je recupère des logs un peu différents et qui fonts quelque peu froid dans le dos :

Oct 25 22:19:51 localhost kernel: Sequencer Free SCB List: 1 2                                   |
Oc|Oct 25 22:19:51 localhost kernel: Sequencer SCB Info:                                            | 2
00|Oct 25 22:19:51 localhost kernel:   0 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x17]  |
Oc|Oct 25 22:19:51 localhost kernel: SCB_LUN[0x0] SCB_TAG[0x3]                                      |
Oc|Oct 25 22:19:51 localhost kernel:   1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)|
Oc|                                                                                                 |
Oc|Oct 25 22:19:51 localhost kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]              |
Oc|Oct 25 22:19:51 localhost kernel:   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)|/l
ea|                                                                                                 |
Oc|Oct 25 22:19:51 localhost kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]              |
Oc|Oct 25 22:19:51 localhost kernel: Pending list:                                                  |
Oc|Oct 25 22:19:51 localhost kernel:   3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x17] SCB_LUN[0x0]  |
Oc|Oct 25 22:19:51 localhost kernel: Kernel Free SCB list: 1 0                                      |
00|Oct 25 22:19:51 localhost kernel: Untagged Q(1): 3                                               |04
Oc|Oct 25 22:19:51 localhost kernel: DevQ(0:1:0): 0 waiting                                         |
us|Oct 25 22:19:51 localhost kernel: DevQ(0:2:0): 0 waiting                                         |
Oc|Oct 25 22:19:51 localhost kernel:                                                                |
Oc|Oct 25 22:19:51 localhost kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>      |
Oc|Oct 25 22:19:51 localhost kernel: (scsi0:A:1:0): Device is disconnected, re-queuing SCB          |
.p|Oct 25 22:19:51 localhost kernel: Recovery code sleeping                                         |
Oc|Oct 25 22:19:51 localhost kernel: (scsi0:A:1:0): Abort Message Sent                              |el
ay|Oct 25 22:19:51 localhost kernel: (scsi0:A:1:0): SCB 3 - Abort Completed.                        |
Oc|Oct 25 22:19:51 localhost kernel: Recovery SCB completes                                         |
Oc|Oct 25 22:19:51 localhost kernel: Recovery code awake                                            |
Oc|Oct 25 22:19:51 localhost kernel: aic7xxx_abort returns 0x2002                                   |
Oc|Oct 25 22:19:51 localhost kernel: end_request: I/O error, dev sr0, sector 112                    |tl
ou|Oct 25 22:19:51 localhost kernel: Buffer I/O error on device sr0, logical block 28               |
Oc|Oct 25 22:19:51 localhost kernel: Buffer I/O error on device sr0, logical block 29               |
Oc|Oct 25 22:19:51 localhost kernel: Buffer I/O error on device sr0, logical block 30

Si quelqu'un a une idée.

Hors ligne

#2 26/10/2004 12:04:57

ledub
Membre
Lieu : Creil (60)
Inscription : 22/04/2003
Messages : 4 545

Re : SCSI mort ou pas ?

Pour le SCSI, il te faut vérifier ta nappe souvent sensible et tes terminateurs, tu sais les trucs qui sont de chaque côtés de ta chaîne SCSI, certainement sur ta carte contrôleur et sur ton dernier périphérique SCSII.


LeDub qui doute qu'une chaîne SCSII puisse mourrir comme ça !!!


« Ne doutez pas qu'un petit nombre de personnes déterminées puisse changer le monde. En fait, ça a même toujours marché comme ça.»
Margaret Mead
---
VeoSearch est un moteur de recherche solidaire qui permet de financer des projets associatifs de développement durable par vos recherches Internet. Utilisez-le !!!

Hors ligne

#3 26/10/2004 12:13:37

ptitlouis
Moderator
Lieu : Levallois-Perret
Inscription : 21/04/2003
Messages : 3 653

Re : SCSI mort ou pas ?

J'ai pas touché aux nappes depuis au moins... tant que ça donc je doute que ce soit ça. Je me suis aperçu de ce « problème » lorsque j'ai installé udev sur mon desktop, peut-être est-ce lié, peut-être pas, qui peut savoir.

Hors ligne

Pied de page des forums