Andesi - forum

Forum francophone pour Debian

Vous n'êtes pas identifié(e).

#1 09/01/2010 20:20:55

damo
Membre
Lieu : Loire
Inscription : 20/01/2009
Messages : 62

Install de gflrx pour carte graph ATI X800

Bonjour,

Ayant eu quelques soucis avec ma carte Nvidia 7950 GT (Affichage anormal de petits carrés rouges)
J'ai donc changé avec une veille carte que j'avais une ATI PCIE X800.
Ma debian est une squeeze.
Pour installer le pilote j'ai suivi cette méthode http://wiki.debian.org/ATIProprietary
Quand j'exécute cette commande

modprobe -r radeon drm

Voici quelques messages d'erreurs concernant nvidia-kernel-nkc et ndiswrapper.

WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.

Je ne vois pas comment supprimer ces paquets
j'ai essayé

aptitude remove ndiswrapper nvidia-kernel-nkc

aptitude ne connais pas ces paquets.
Comment utiliser module-assistant ou bien modprobe ?

J'ai essayé d'installer les pilotes sans modprobe mais ça ne fonctionne pas.
Je me vois obligé d'installer les pilotes proprios -> dommage.

Merci

ps : J'ai vraiment eu de gros soucis avec ndiwrapper.
Des messages bizarres au démarrage.
cf. http://debian-facile.org/forum/viewtopi … 290#p16290

Dernière modification par damo (09/01/2010 20:40:33)

Hors ligne

#2 09/01/2010 22:42:34

ustilago
Membre
Lieu : Charente-Maritime
Inscription : 14/08/2004
Messages : 1 540
Site Web

Re : Install de gflrx pour carte graph ATI X800

Bonsoir,

Ces messages ne sont pas graves, et correspondent probablement à des résidus de configuration.

Au pire, si tu n'utilises plus ces paquets, dans une future version de modprobe, ces fichiers de configuration seront ignorés wink

Regardes du côté de gtkorphan pour supprimer les paquets orphelins, et les résidus de configuration big_smile

Usti


Faut pas énerver un tigre ...

Hors ligne

#3 09/01/2010 23:20:28

damo
Membre
Lieu : Loire
Inscription : 20/01/2009
Messages : 62

Re : Install de gflrx pour carte graph ATI X800

Salut utilago

J'ai utilisé gtkorphan -> merci
Très intéressant comme paquet.
J'ai viré toutes traces de nvidia et de ndiswrapper (J'ai même activé les options) tout est ok
Mais ces foutus messages reviennent à chaque fois.
Est-ce que j'ai le droit d'enlever tout les paquets orphelins ? Au pire il réinstallera les dépendances que j'aurais supprimées s'il en a besoin.

Peut-être que ces messages ne sont pas très important mais dans mon cas je ne peux effectuer cette commande

modprobe -r radeon drm

ni même

modprobe fglrx

Quoique pour modprobe fglrx il me dit

FATAL: Error inserting fglrx (/lib/modules/2.6.30-2-686/misc/fglrx.ko): No such device

utilago a écrit :

dans une future version de modprobe, ces fichiers de configuration seront ignorés

Je n'ai pas envie d'attendre la future version.

J'ai trouvé les traces de ces nvidia-kernel-nkc et ndiswrapper

ls /etc/modprobe.d/
ndiswrapper
nvidia-kernel-nkc

Les voilà, les vilains...  :twisted:
Et voici ce que me donne

cat /etc/modprobe.d/nvidia-kernel-nkc
alias char-major-195* nvidia
options nvidia NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=44 NVreg_DeviceFileMode=0660

Et voici pour ndiswrapper

cat /etc/modprobe.d/ndiswrapper
alias pci:v000011ABd00001FA6sv*sd*bc*sc*i* ndiswrapper
alias pci:v000011ABd00001FA7sv0000103Csd00002A1Bbc*sc*i* ndiswrapper
alias pci:v000011ABd00001FA7sv0000108Fsd00001043bc*sc*i* ndiswrapper
alias pci:v000011ABd00001FA7sv0000128Fsd00001043bc*sc*i* ndiswrapper
alias pci:v000011ABd00001FA7sv0000138Esd00001043bc*sc*i* ndiswrapper
alias pci:v000011ABd00001FA7sv0000138Fsd00001043bc*sc*i* ndiswrapper
alias pci:v000011ABd00001FA7sv*sd*bc*sc*i* ndiswrapper

J'ai bien envie de faire le barbare un peu bourrin  :smt003

rm /etc/modprobe.d/ndiswrapper

&

rm /etc/modprobe.d/nvidia-kernel-nkc

Je vais être obligé d'installer le pilote proprio ATI catalyst en (.run) en plus.
C'est pas bien non ?

a+ Merci

Dernière modification par damo (09/01/2010 23:40:02)

Hors ligne

#4 10/01/2010 09:50:07

damo
Membre
Lieu : Loire
Inscription : 20/01/2009
Messages : 62

Re : Install de gflrx pour carte graph ATI X800

Re

J'ai enfin compris  à quoi servait modprobe
J'ai donc poursuivi l'installation du pilote

Après avoir configuré avec m-a fglrx
J'ai ajouté fglrx à /etc/modules
Et comme par surprise qu'est-ce que je vois
ndiswrapper ?????????  :twisted:
Est-ce que je peux le virer de /etc/modules ?

Revenons en à nos moutons ...  smile
Après /etc/modules J'ai exécuté cette commande

aticonfig --initial -f

il me dit

aticonfig: No supported adapters detected

Est-que un Xorg -configure ne serait pas mieux maintenant que fglrx est installé ?

J'ai donc essayé de modifier le xorg.conf manuellement comme indiqué dans le wiki en modifiant ces sections :

Section "Device"
    Identifier  "ATI"
    Driver      "fglrx"
EndSection
Section "Screen"
    Identifier "Default Screen"
    DefaultDepth     24
EndSection

Mais rien à faire.
Voici ce que me donne

cat /var/log/Xorg.0.log.old

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.8-dsa-ia32 i686 Debian
Current Operating System: Linux ganja 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i686
Build Date: 13 October 2009  11:25:51AM
xorg-server 2:1.6.5-1 ([email protected]) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 10 08:16:29 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
    Using the first device section listed.
(**) |   |-->Device "ATI"
(==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/100dpi/".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/75dpi/".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/75dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/75dpi").
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x6c0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:5:0:0) 1002:554f:148c:2111 ATI Technologies Inc R430 [Radeon X800 (PCIE)] rev 0, Mem @ 0xd0000000/268435456, 0xcefe0000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.5, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.68.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.5, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.68.2
    Module class: X.Org Video Driver
(II) ATI Proprietary Linux Driver Version Identifier:8.68.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.681                                
(II) ATI Proprietary Linux Driver Build Date: Nov 24 2009 21:15:37
(II) Primary Device is: PCI 05@00:00:0
(WW) Falling back to old probe method for fglrx
(EE) No supported AMD display adapters were found
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Je trouve ces quelques lignes bizarres

(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/100dpi/".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/75dpi/".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/75dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/X11/75dpi").

Comment faire pour que le xorg.conf fonctionne avec le driver "fglrx" ?

A bientôt
damien

ps : Voici mon xorg.conf actuel qui fonctionne avec le pilote "radeon"

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection
Section "Module"
    Load  "dbe"
    Load  "extmod"
    Load  "record"
    Load  "glx"
    Load  "dri"
    Load  "dri2"
EndSection
Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection
Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection
Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "DynamicClocks"          # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "R430 [Radeon X800 (PCIE)]"
    BusID       "PCI:5:0:0"
EndSection
Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Dernière modification par damo (10/01/2010 09:58:21)

Hors ligne

Pied de page des forums